Welcome to the all new Grimpeur J Series.  A new pressurised CAT4 cab, climate control, Tier 4B 230hp FPT engine, 50kph, Cruise control and ECO Drive saving 25% on road fuel usage

Bargam Grimpeur J Series

The Bargam Grimpeur J Series has a central hydrostatic drive connected to a mechanical gearbox, with all the traction, reliability and simplicity associated with mechanical axles. Better than this, with right size flotation wheels, this machine only creates 8psi ground pressure fully loaded. 
Cab visibility is superb, Air conditioning, Category 4 filtration and pressurisation is standard. The new cab (CAT4 Pressurised) has taken sprayers to a new level for cab comfort, quietness and superior ergonomics. There are no rear corner pillars to increase boom visibility. 

A stunning layout of simple quality switches with a digital display for engine rpm, fuel level and system monitoring help to make the operators day that bit easier! The Mueller / Bargam, or Arag controller makes spraying effortless. One system to control the sprayer, all the GPS functions, variable rate application and auto height control. One box that does everything!  All the machines in this series are ISOBUS. This means we can connect, for example a Trimble FMX screen into the cab directly using the Mueller ports that are already present.

All-round axle suspension and load sensing is fitted as standard. It has a 230hp 6 cylinder FPT engine which gives more than enough horse power especially on steep hills and can travel up to 50k on the road.

Why is the Grimpeur J Series better than a lot of other  machines? Because it has a large diameter wheel fitted. People talk of problems with wheel motors ~ these problems mainly come from one reason!  The answer – too small diameter wheels on a large machine! A motor is designed so the weight is carried dead centre an not off set. If the wheel diameter is small, the motor cannot be installed within the wheel dish and putting the weight in the right position on the wheel motor bearing. A tall wheel makes this easy and therefore, far more reliable!  If you look at the class leading machines on the world market – all have a tall wheel!  This is for 2 reasons! 

1. For the information above! 
2. A tall wheel ALWAYS travels better! Mechanical gives that superb ability to travel in rough, steep and wet terrain when others cannot!

The latest machines are all coming with ECO drive and Cruise control.  This has also given a system that automatically controls the drive and the engine RPM simultaneously.  This saves fuel and give a smooth and uncomplicated drive. In the field, if 12kph is set, and you come to a hill, the RPM may change and the oil flow to the drive increase, but the speed will remain at 12kph, the machine simply sorts it all out! 

Boom functions which consist of independent boom arm geometry, independent boom section folding and parallel lift arm height adjustment are also mounted on the joystick. The SL boom normally fitted to the MAC range was designed for working in Australia and Russia where the average spraying speed is around 20k, this is why each boom arm is independently sprung, as well as the whole boom being sprung on the parallelogram lift. The boom main fold rams are in the “closed” position when the boom is open, effectively doubling the strength. The SL Boom is available up to a width of 32m.

We also offer a great tri fold 28m to 36m boom which folds to 12, 24 and 36m. or 28/24/12m  or 30/32/24/12. Variable geometry and independent boom arm suspension is standard.

Standard Specification

  • 230hp 6 Cylinder turbo engine TIER4 Final 
  • Load sensing self adjusting suspension
  • Floor switch steering control for 4 wheel steer
  • Crab steer
  • Diff Lock
  • 50 kph road speed 
  • Air Conditioning
  • GPS Guidance system built into rate controller
  • GPS auto boom section control
  • GPS RTK ready
  • Boom electro-hydraulic control with joystick
  • Boom Sections on Joystick
  • High Quality powerful 30 Litres mixer hopper equipped with high pressure can washer.
  • 300 or 400ltr Clear water tank with system cleaning device.
  • Diaphragm pump for spraying and agitation 400lt/min standard (others available)  A centrifugal pump can be specified on request.
  • Clean Water to Induction Hopper
  • Hydraulic ladder.
  • Weight: 8000Kg’s Unladen – Weight Distribution 48% – 52% (with 24m boom on RC wheels)
  • Boom stabilizing kit
  • 380 90 R46 Wheels – gives high clearance and superb traction
  • Joystick Control (standard)
  • Pneumatic Air Controls for liquid system or Seletron individual nozzle control
  • Full Line Purge Recirculation System (standard)
  • Cleaning system operated from the cab incl tank wash
  • Presettable Auto Tank fill and continuous tank level information
  • NEW CAT4 pressurised euro 4 standard cab with climate control
  • 3500lt or 4350lt tank
  • Standard with Either MUELLER TOUCH 800 or ARAG DELTA 80


  • Mueller Touch1200 Terminal
  • GPS Auto Steering
  • Quad Nozzle Bodies
  • 9 liquid boom sections
  • 11 liquid boom sections
  • 13 liquid boom sections
  • Individual nozzle control (Seletron)
  • 700lt/min fill pump
  • Auto height control (tilt/lift)
  • Auto height (tilt/lift/VG) ***
  • LED nozzle lighting kit
  • LED boom flood lights
  • 28m twin fold boom
  • 30m twin fold boom
  • 30m tri fold boom
  • 36m tri fold boom
  • Twin fan air sleeve boom
  • On board 1800PSI pressure washer
  • Hypro ESI Fertilizer
  • Guardian Air
  • Guardian Air Twin
  • BFS Air Induction
  • Angled Caps
  • LGP Wheels
  • 600 65 R34 Alliance or Kleber tyres
  • 600 65 R34 Michelin tyres
  • 520 85 R38 Alliance or Kleber tyres
  • 520 85 R38 Michelin tyres

Price List ARAG

Which rate controller and GPS system?